Correlation Between Aftereffects for Roughness of Surfaces of Metal Counterface and Carbon-Plastics

Array

Authors

  • H.O. Sirenko Vasyl Stefanyk Precarpathian National University
  • M.B. Skladanyuk Vasyl Stefanyk Prekarpathian University
  • L.M. Soltys

DOI:

https://doi.org/10.15330/pcss.16.2.388-397

Keywords:

roughness, intensity of wear, isotropic surface, friction, composite polymer material, moments of spectral density

Abstract

Regularities of change of isotropic roughness surfaces of steel 45 in friction and wear in a pair with polymer composite has been researched. It has been detected that the topography of the conjugated metal surface with polymer composite is the dominant factor in determining the value of wear of carbon-plastics at both the start and in the process friction and wear when the metal surface roughness is created by the composite. It has been established that between aftereffects values for roughness of metal counterface and polymer composite in friction and wear exists reliable linear relationship.

References

[1] Ju. V. Ashkerov, Ju. V. Zaikin, A. Ju. Paplev, Trenie i iznos, 5 (1), 651 (1984).
[2] N. V. Balabanova, S. A. Chizhik, Z. Rimuza, Trenie i iznos, 27 (5), 514 (2006).
[3] N. K. Bachinskaja, Issledovanija kontaktnyh haratkeristik sherohovatyh, sil'no anizotropnyh poverhnostej: Dis. ... kand. tehn. nauk: 05.02.04 (Hmel'nickij, 1994).
[4] A. Bengtsson, A. Renberg, Trenie i iznos, 7 (1), 27 (1986).
[5] Je. A. Bulanov, Trenie i iznos, 27 (2), 132 (2006).
[6] A. I. Burja, A. D. Derkach, V. I. Shemavnev, Trenie i iznos, 27 (1), 98 (2006).
[7] V. A. Valetov, Trudy LKI «Tehnologija korpusostroenija, sudovogo mashinostroenija i svarki v sudostroenii» (Leningrad), 19 (1978).
[8] N. B. Demkin, Trenie i iznos, 3 (4), 586 (1982).
[9] N. B. Demkin, S. V. Udalov, V. A. Alekseev, V. V. Izmajlov, A. N. Bolotov, Trenie i iznos, 29 (3), 231 (2008).
[10] M. N. Dobychin, Trenie i iznos, 1 (2), 341 (1980).
[11] I. V. Kragel's'kij, V. V. Aleksin, V. S. Kolebanov et al., Harakteristiki vzaimodejstvija v mikrogeometrii, opredeljajushhie kontaktnoe vzaimo¬dejstvie sherohovatyh poverhnostej (IMASh, Moskva, 1973).
[12] I. V. Kragel's'kij, Trenie i iznos, 1 (1), 12 (1980).
[13] I. I. Kudish, Trenie i iznos, 12 (2), 197 (1991).
[14] V. B. Lemberskij, Trenie i iznos, 4 (2), 301 (1983).
[15] N. K. Myshkin, M. I. Petrokovec, S. A. Chizhik, V. V. Konchic, A. I. Sviride¬nok, Trenie i iznos, 4 (5), 845 (1983).
[16] L. Ju. Pruzhanskij, Trenie i iznos, 4 (5), 801 (1983).
[17] A. I. Svirdenok, T. F. Kalmykova, Trenie i iznos, 1 (5), 898 (1980).
[18] I. O. Sivak, V. V. Savuljak, S. I. Suhorukov, E. I. Sivak, The Bulletin of Politechnic Institute of Jassi. XLVIII (LII), 3-4, 165 (2002).
[19] G. A. Sirenko, N. F. Semenjuk, 3 Vsesoju. soveshhanija po uplotnitel'noj tehnike (VNIIkompres¬sormash, Sumy, 1982), s. 46.
[20] V. T. Fonotov, I. A. Vjatkin, Ju. V. Volkov, Problemy trenija i iznashivanija, (4), 66 (1973).
[21] Ja. Cuan, S. A. Chizhik, Ju. M. Pleskachevskij, A. L. Zajcev, Trenie i iznos, 28 (1), 77 (2007).
[22] I. H. Chepoveckij, V. I. Levitas, S. A. Jushhenko, Trenie i iznos, 7 (5), 841 (1986).
[23] I. H. Chepoveckij, V. L. Strizhakov, Trenie i iznos, 2 (5), 928 (1981).
[24] A. A. Chernov, BSJe, (13), 435 (1973).
[25] V. M. Shavelin, A. S. Shheglov, Trenie i iznos, 7 (1), 148 (1986).
[26] I. B. Shenderov, A. S. Duhanin, V. A. Kalinov, Trenie i iznos, 10
(2), 313 (1989).
[27] V. G. Shherbinskij, Trenie i iznos, 12 (6), 1133 (1991).
[28] M. O. Jakobson, Kachestvo poverhnosti detalej mashin, (5), 120 (1961).
[29] V. M. Baranov, E. M. Kudryavstev, G. A. Sarychev, A. Z. Stopyra, Friction and wear, 24 (2), 139 (2002).
[30] A. Ya. Grigoriev, K.-L. Cho, N. K. Myshkin, Friction and wear, 22 (2), 128 (2000).
[31] V. S. Kharchenkov, V. A. Pogonyshev, V. I. Lemeshko, Friction and wear, 21 (1), 91 (1999).
[32] A. A. Khmyl, A. P. Dostanko, V. G. Anisimovich, S. A. Chizhik, Friction and wear, 18 (4), 491 (1996).
[33] V. M. Khokhlov, Friction and wear, 19 (3), 415 (1997).
[34] T. R. Thomas, Wear, 79 (1), 73 (1982).
[35] T. R. Thomas, Wear, 33 (2), 205 (1975).
[36] V. P. Tikhomirov, O. A. Gorlenko, Friction and wear, 18 (1), 74 (1996).
[37] A. I. Voyachek, Friction and wear, 18 (3), 307 (1996).
[38] D. J. Whitehouse, J. F. Archard, Proceedings of the Royal Soc., 316 (A), 97 (1970).
[39] D. J. Whitehouse, J. F. Archard, Surface Mechanics, Proceedings of the ASME Annual winter meeting, Los Angeles, Calif, November, 16 (1969).
[40] A. A. Yevtushenko, E. G. Ivanik, E. V. Kovalenko, Friction and wear, 20 (1), 17 (1998).
[41] I. A. Zharov, Friction and wear, 18 (6), 715 (1996).
[42] N. F. Semenjuk, N. K. Bachinskaja, Problemy tribologii, (3), 103 (1998).
[43] N. F. Semenjuk, Trenie i iznos, 7 (6), 1017 (1986).
[44] N. F. Semenjuk, G. A. Sirenko, Trenie i iznos, 1(3), 465 (1980).
[45] N. F. Semenjuk, G. A. Sirenko, Trenie i iznos, 1(5), 815 (1980).
[46] M. F. Semenjuk, G. O. Sіrenko, L. M. Soltis, Fіzika і hіmіja tverdogo tіla, 12 (1), 200 (2011).
[47] M. F. Semenjuk, G. O. Sіrenko, L. M. Soltis, Vіsnik Prikarp. nac. un-tu іm. V. Stefanika. Ser. Hіmіja, (ІH), 62 (2010).
[48] N. F. Semenjuk, K. S. Sokolan, Problemi tribologії, 2 (2000).
[49] N. F. Semenjuk, Trenie i iznos, 7(5), 830 (1986).
[50] N. F. Semenjuk, Trenie i iznos, 7(1), 85 (1986).
[51] N. F. Semenjuk, E. V. Terleckaja, Problemy tribologii, (1), 83 (1998).
[52] N. F. Semenjuk, E. V. Terleckaja, Problemy tribologii, (1), 90 (1998).
[53] G. O. Sіrenko, O. V. Kuzishin, L. Ja. Mіdak, Chetverta mіzhnarodna naukovo-praktichna konferencіja «Rozvitok naukovih doslіdzhen' 2008» (ІnterGrafіka, Poltava, 2008), s. 38.
[54] G. O. Sіrenko, M. F. Semenjuk, І Mіzhnarod. simpozіum “Fіziko-hіmіchna mehanіka kompozicіjnih materіalіv” (Іvano-Frankіvs'k, 1993), s. 53.
[55] G. O. Sіrenko, M. F. Semenjuk, L. M. Soltis, Vіsnik Prikarp. nac. un-tu іm. V. Stefanika. Ser. Hіmіja, (H), 123 (2010).
[56] G. O. Sіrenko, M. F. Semenjuk, L. M. Soltis, Fіzika і hіmіja tverdogo tіla, 11(4), 914 (2010).
[57] G. O. Sіrenko, M. F. Semenjuk, L. M. Soltis, Fіzika і hіmіja tverdogo tіla, 11(3), 768 (2010).
[58] G. O. Sіrenko, L. M. Soltis, Fіzika і hіmіja tverdogo tіla, 11(2), 423 (2010).
[59] G. O. Sіrenko, L. M. Soltis, Vіsnik Prikarp. nac. un-tu іm. V. Stefanika. Ser. Hіmіja, (VІІ), 104 (2009).
[60] A. P. Husu, Ju. R. Vittenberg, V. A. Pal'mov, Sherohovatost' poverhnostej. Teoretiko-verojatnostnyj podhod (Nauka, Moskva, 1975).
[61] M. I. Jadrenko, Spektral'naja teorija sluchajnyh polej (Vishha shk., Kiev, 1980).
[62] P. R. Najjak, Problemy trenija i smazki, 93 (Ser. F, 3), 85 (1971).
[63] I. Ja. Shtaerman, Kontaktnaja zadacha teorii uprugosti (Gostehizdat, Moskva-Leningrad, 1949).
[64] M. G. Cooper, B. B. Mikis, M. M. Yovanovich, International Journal of heat and mass transfer, 12, 279 (1969).
[65] A. W. Bush, R. D. Gibson, G. P. Keogh, Res. Comm. Mech., 3, 169 (1976).
[66] A. W. Bush, R. D. Gibson, T. R. Thomas, Wear, 35, 87 (1976).
[67] A. W. Bush, R. D. Gibson, G. P. Keogh, Wear, 40, 399 (1976).
[68] S. B. Ajnbinder, Je. L. Tjunina, Vvedenie v teoriju trenija polimerov (Zinatne, Riga, 1978).
[69] S. B. Ajnbinder, Je. L. Tjunina, Mehanika polimerov, (2), 241 (1977).
[70] S. B. Ajnbinder, Je. L. Tjunina, Mehanika polimerov, (4), 651 (1977).
[71] G. O. Sіrenko, L. M. Soltis, Fіzika і hіmіja tverdogo tіla, 14 (3), 636 (2013).
[72] N. F. Semenjuk, T. F. Kalmykova, Trenie i iznos, 4 (3), 467 (1983).
[73] M. S. Longe-Higgins, Statisticheskaja geometrija sluchajnyh poverhnostej (Mir, Moskva, 1964).
[74] G. Korn, T. Korn. Spravochnik po matematike dlja nauchnyh rabotnikov i inzhenerov: Opredelenija, teoremy, formuly. Izd. 4-e (Nauka, Moskva, 1978).
[75] G. A. Sirenko, Antifrikcionnye karboplastiki (Tehnіka, Kiev, 1985).
[76] G. A. Sirenko, V. P. Sviderskij, V. D. Gerasimov, V. Z. Nikinov, Antifrikcionnye termostojkie polimery (Tehnіka, Kiev, 1978).
[77] G. O. Sіrenko, Stvorennja antifrikcіjnih materіalіv na osnovі poroshkіv termotrivkih polіmerіv ta vuglecevih volokon: Dis. … dokt. tehn. nauk (Іn-t problem materіaloznavstva іm. І.M. Francevicha NANU, Kiїv, 1997).
[78] L. B. Sokolov, V. D. Gerasimov, V. M. Savinov, V. K. Beljakov, Termostojkie aromaticheskie poliamidy (Himija, Moskva, 1975).
[79] Ju. A. Panshin, S. G. Malkevich, C. S. Dunaevskaja, Ftoroplasty (Himija, Leningrad, 1978).
[80] P. Mjuller, P. Nojman, R. Shtorm, Tablicy po matematicheskoj statistike (Finansy i statistika, Moskva, 1982).
[81] G. O. Sіrenko, L. M. Soltis, M. F. Semenjuk, Vіsnik Prikarp. nac. un-tu іm. V. Stefanika. Ser. Hіmіja, (HІІ), 133 (2011).
[82] M. N. Stepnov, Statisticheskaja obrabotka rezul'tatov mehanicheskih ispytanij (Mashinostroenie, Moskva, 1972).
[83] G. O. Sіrenko, L. M. Soltis, Vіsnik Prikarp. nac. un-tu іm. V. Stefanika. Ser. Hіmіja, (VIІІ), 99 (2009).
[84] M. S. Longuet-Higgins, Philos. Trans. of the Royal Soc., 249 (A), 321 (1957).
[85] M. F. Semenjuk, G. O. Sіrenko, L. M. Soltis, Fіzika і hіmіja tverdogo tіla, 12 (3), 795 (2011).
[86] M. F. Semenjuk, G. O. Sіrenko, L. M. Soltis, Vіsnik Prikarp. nac. un-tu іm. V. Stefanika. Ser. Hіmіja, (IH), 62 (2010).
[87] N. F. Semenjuk, G. A. Sirenko, Trenie i iznos, 1(6), 1010 (1980).

Published

2015-06-15

How to Cite

Sirenko, H., Skladanyuk, M., & Soltys, L. (2015). Correlation Between Aftereffects for Roughness of Surfaces of Metal Counterface and Carbon-Plastics: Array. Physics and Chemistry of Solid State, 16(2), 388–397. https://doi.org/10.15330/pcss.16.2.388-397

Issue

Section

Scientific articles

Most read articles by the same author(s)

1 2 > >>