Single crystal characteristics of the Mg - 5% Li alloy, found from the polycrystalline experimental data and the Kearns texture parameters
This work aimed to experimentally determine of the Kearns texture parameters, elastic moduli, mechanical properties (ultimate tensile strength and yield strength) of sheets of an alloy of Mg 5 wt. % Li after various types of processing: 1) extrusion at 350 ° C through a rectangular die; 2) rolling with a change in its direction by 90° and intermediate annealing at 350°C after each pass; 3) after the subsequent alternating bending (AB) by 0.5; one; 3 and 5 cycles and evaluation of the elastic and mechanical properties of the corresponding single crystal of the alloy under study using the indicated data. The moduli of elasticity and strength characteristics of the studied polycrystalline samples were determined in the rolling direction (RD) and transverse direction (TD). Using the found parameters of the Kearns texture and the elastic and mechanical properties of the sheets, the values of the elastic modules and the ultimate strength and yield strength of the single crystal of the above alloy were estimated. The found modules of elasticity of a single crystal of an alloy Mg-5 wt. % Li deviate from their values found in previous studies by no more than 7.5%. Elastic modules and strength characteristics of the studied samples of magnesium alloy Mg 5 wt. % Li calculated from the single crystal data deviate from the experimental data by no more than 10%.
Magnesium alloys, FindPatent.ru, http://www.findpatent.ru/patent/245/2456362.html [in Russian].
M.A. Leeflang, J. Zhou, J. Duszczyk, Deformability and extrusion behavior of magnesium-lithium binary alloys for bio-medical applications, In K.U. Kainer (Ed.), Magnesium, Proceedings of the 8th International Conference on Magnesium Alloys and their Applications, 1182 (2009). Weinheim, Germany: Wiley-VCH, – Web source: http://www.3me.tudelft.nl/fileadmin/Faculteit/3mE/Over_de_faculteit/Afdelingen/Materials_Science___Engineering/MSE_News/scienceday2009/doc/M.A._Leeflang,_J._Zhou_and_J._Duszczyk.pdf
C.O. Muga and Z.W. Zhang Strengthening, Mechanisms of Magnesium-Lithium Based Alloys and Composites, Advances in Materials Science and Engineering (2016) Article ID 1078187; https://doi.org/10.1155/2016/1078187.
C.Q. Li, Xu D.K., S Yu., L.Y. Sheng, E.H. Han, Effect of Icosahedral Phase on Crystallographic Texture and Mechanical Anisotropy of Mg-4%Li Based Alloys, Acta Metallurgica Sinica (English Letters), 33(5), 475 (2017); https://www.amse.org.cn/article/2017/1006-7191/1006-7191-33-5-475.shtml.
Sung-Yu Tsai and Jen-Yuan (James) Chang Design of deep learning on intelligent levelling system for industry 4.0 technology, MATEC Web of Conferences 185, 00026 (2018); https://doi.org/10.1051/matecconf/201818500026 ICPMMT 2018.
J. Kearns, Thermal Expansion and Preferred Orientation in Zircaloy (1965); https://ntrl.ntis.gov/NTRL/dashboard/searchResults/titleDetail/WAPDTM472.xhtml.
D. Dzunovich,, S. Betsofen, and P. Panin, Methodological aspects of the quantitative texture analysis of HCP Alloy (Ti, Zr) sheet semiproducts., Russian Metallurgy (Metally) 10, 813 (2017); https://doi.org/10.1134/S0036029517100056 https://link.springer.com/article/10.1134%2FS003602951710005.
J. Kearns, On the relationship among “f” texture factors for the principal planes of zirconium, hafnium and titanium alloys, Journal of Nuclear Materials, 299(2), 171 (2001); https://doi.org/10.1016/S0022-3115(01)00686-9).
V. Grytsyna, D. Malykhin, T. Yurkova et al., On Structural Aspects of Texture Changes During Rolling of Zr-2.5%Nb Alloy. East European Journal of Physics 3, 38 (2019; https://periodicals.karazin.ua/eejp/article/view/14359/13506.
V. Usov, N. Shkatulyak, E., N. Rybak, Elastic properties of alloy ZE10 sheets evaluation by Kerns texture parameters. East Eur. J. Phys. 1, 43 (2021), https://periodicals.karazin.ua/eejp/article/view/16552
Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio by Impuls Excitation of Vibration; http://forlab.pt/wp-content/uploads/2015/08/E1876_mvuj8965.pdf.
N. Shkatulyak, S. Smirnova, and V. Usov, Effect of Alternating Bending on Texture, Structure, and Elastic Properties of Sheets of Magnesium Lithium Alloy, Hindawi Publishing Corporation, International Journal of Metals, Article ID 349810, 8 pages, (2015); http://dx.doi.org/10.1155/2015/349810.
[H. Hafekamp, M. Niemeyer, R. Bohem, U. Holzkamp, C. Jaschik and V. Kaese, Development, Processing and Applications Range of Magnesium Lithium Alloys, Material Science Forum 350-351, 31-42 (2000); https://doi.org/10.4028/www.scientific.net/MSF.350-351.31.
P. R. Morris, Journal of Applied Physics 30(4) (1959); https://doi.org/10.1063/1.1702413.
J. F. Nye Physical properties of crystals their representation. Their representation by tensors and matrices, (Oxford: University Press, 2006).
Ya. D. Vishnyakov, A. A. Babareko , S. A. Vladimirov, I. V. Egiz, The theory of texture formation in metals and alloys, Nauka, Moscow, 1979, https://ua1lib.org/book/2990475/783dc1?id=2990475&secret=783dc1.
D. W. Hogan and D. J. Dyson, Angles between planes in the hexagonal and tetragonal crystal systems, Micron, 2, 59 (1970); https://doi.org/10.1016/0047-7206(70)90045-2.
V. Grytsyna, D. Malykhin, T. Yurkova et al. On Structural Aspects of Texture Changes During Rolling of Zr-2.5%Nb Alloy, East Eur. J. Phys. 3, 38 (2019); https://doi.org/10.26565/2312-4334-2019-3-05.
N. Shkatulyak, E. Savchuk, V. Usov. Anisotropic damage of titanium plates under uniaxial tension after reverse bending. J. Mater Res Technol. 7, 11, 82 (2017); https://doi.org/10.1016/j.jmrt.2017.06.007
N. Shkatulyak, V. Usov, S. Smirnova, Single Crystal Magnesium Lithium Alloy Elastic (4)1-11 (2015); https://www.wireilla.com/engg/ijamse/papers/4415ijamse01.pdf.