Analysis of stress-strain state of the metal plate based on discrete data of displacement values

E.Y. Ripetskyi; R.Y. Ripetskyi; O.I. Nepelyak

doi:10.15330/pcss.25.3.595-604

Authors

E.Y. Ripetskyi Ivano Frankivsk National Technical University of Oil and Gas, Ivano-Frankivsk, Ukraine
R.Y. Ripetskyi Ivano Frankivsk National Technical University of Oil and Gas, Ivano-Frankivsk, Ukraine
O.I. Nepelyak Ivano Frankivsk National Technical University of Oil and Gas, Ivano-Frankivsk, Ukraine

DOI:

https://doi.org/10.15330/pcss.25.3.595-604

Keywords:

metal plate, stress-strain state, finite element method, discrete data, spatial interpolation, polynomial spline function, grid-cell

Abstract

An actual problem of stress-strain state (SSS) analysis of a bent metal plate under an uncertain acting load is solved.

A problem in the direct use of spatial interpolation for obtaining the surface of a metal plate, which is realized in the Surfer software product, is formed. It is noted that direct use of existing interpolation methods without considering physical-mechanical properties leads to results distortion. It was noted that spatial interpolation methods have analogy with the finite element method (FEM) in terms of surface display using meshes. This was the basis for comparing the results of surface modelling by FEM and grid-cell interpolation methods. The main difference of the interpolated surface was the absence of spline properties.

A new approach to solving the problem was the additional use of second and fourth-order polynomial spline functions, whose expressions are obtained from the initial and boundary conditions of the deformed plate. With its help, lines of smooth curvature, which acted as frame lines, were obtained and plotted on the grid-cell surface. The introduction of the frame lines on the grid-cell resulted in the combination of the initial discrete data with the displacement values calculated using the expressions of polynomial spline functions. A significant increase in the number of point data allowed the spatial interpolation method to extend the spline properties to the grid-cell interframe space as well. As a result, an adequate deformed surface of a metal plate was reproduced, giving it spline properties - smooth radii of curvature.

References

Iu.L. Vynnykov, S.F. Pichuhin, O.O. Dovzhenko, A.O. Dmytrenko, P.P. Voskobiinyk, A.V. Yakovliev, Building constructions. Textbook (PoltNTU, Poltava, 2011).

K. Burak, V. Kovtun, M. Nychvyd, Building 3D Surfaces of Land storage vertical Cylindrical Steel Tank using Bicubic Spline Interpolation, Geodesy and Cartography, 45(2), 85 (2019); https://doi.org/10.3846/gac.2019.6301.

A.K. Nandi, H. Mishra, Stress Calculation for Rectangular Plate using Simplified Analytical Method. International Journal of Research Publications in Engineering and Technology [IJRPET], 3(4), 174 (2017); https://repo.journalnx.com/index.php/nx/article/view/2698.

M. Roknuzzaman, M.B. Hossain, M.R. Haque, T.U. Ahmed, Analysis of Rectangular Plate with Opening by Finite Difference Method. American Journal of Civil Engineering and Architecture, 3(5), 165 (2015); https://doi.org/10.12691/ajcea-3-5-3.

A.A. Komlev, S.A. Makeev, The calculation of rectangular plates on elastic foundation the finite difference method. Journal of Physics: Conference Series, 944, 1 (2018); https://doi.org/10.1088/1742-6596/944/1/012056.

Matt Lombard. Mastering SolidWorks, 1248 (2018); https://doi.org/10.1002/9781119516743.

K.L Lawrence. Ansys Workbench Tutorial, v.10 (University of Texas at Arlington, Arlington, 2007)

M. Pidgurskyi; I. Pidgurskyi; M. Stashkiv; V. Ihnatieva; S. Danylchynko; D. Bykiv; O. Pidluzhnyi. Peculiarities of Studying the Stress-Strain State of Structural Steel perforated beams using the Finite Element Method. Scientific Journal of the Ternopil National Technical University 3 (111), 126 (2023); https://doi.org/10.33108/visnyk_tntu2023.03 126-138.

D.E. Weisberg The Engineering Design Revolution: The People, Companies and Computer Systems that Changed Forever the Practice of Engineering (Englewood, 2008).

C. Gonenli, H. Ozturk, O. Das, Effects of the Radius of Curvature on Natural Frequency and Mode Shape, International Journal of Scientific Research and Management, 7(12), 283 (2019). https://orcid.org/0000-0001-9163-1569.

O.O. Svitlychnyi, S.V. Plotnytskyi, Fundamentals of geoinformatics: Textbook. (VTD "Univ. kn.", Sumy, 2006).

Surfer. User's Guide: Contouring and 3D Surface Mapping for Scientists and Engineers. Golden Software, LLC. 1431 с.

P. Stephen, S. Timoshenko, S. Woinosky-Krieger, Theory of plates and shells (McGraw Hill, New York, 1959);

J.N Reddy, Theory and analysis of elastic plates (Taylor and Francis, Boca Raton, 2006); https://doi.org/10.1201/9780849384165.

Iu. P. Petrov, Bending calculation of elastic rectangular plates by discrete method, Trudy. Kharkov Aviation Institute, 18, 83 (1961); http://dspace.library.khai.edu/xmlui/handle/123456789/584.

L.A. Kolesnykov, Bending equations of elastic plates when taking into account the refined curvature expression, Bul. Kharkov Aviation Institute, 18, 39 (1961); http://dspace.library.khai.edu/xmlui/handle/123456789/552.

R.H. Gallagher, Finite element analysis: Fundamentals (Englewood Cliffs, N.J. 1975).

V. Akmadzic V. Raspudic M. Lozancic, XXII International Scientific Conference VSU'2022 (Bulgaria, Sofia, 2022). https://www.researchgate.net/publication/365202856_comparison_of_the_convergence_of_results_on_the_example_of_a_thin_plate.

Yi. Huaminga, C. Yanping, W.Yang, H. Yunqing, A two-grid immersed Finite Element Method with the Crank-Nicolson time Scheme for semilinear parabolic InTerface Problems, Applied Numerical Mathematics, 189, 1 (2023); https://doi.org/10.1016/j.apnum.2023.03.010.

E. Ripetskyy, R. Ripetskyy, M. Pidgurskyi, I. Pidgurskyi, O. Korobkov, Adaptation of Energy Methods to Automated Calculation of Mobile Machines Frame Constructions. Physics and Chemistry of Solid State, 22(1), 284 (2020); https://doi.org/10.15330/pcss.22.2.284-291.

U. Litwin, J.M. Pijanowski, A. Szeptalin, M. Zygmunt, Application of Surfer Software in Densification of Digital Terrain Model (Dtm) Grid with the use of Scattered Points, Geomatics, Landmanagement and Landscape. 1, 51, (2013); https://doi.org/10.15576/GLL/2013.1.51.

O.Ya. Kravets, The use of geoinformation technologies in the study of landslide processes, Scientific bulletin of UNFU, 30 (2), 113 (2020); https://doi.org/10.36930/40300220.

L. Gao, Y. Song B. Zhao, 3D Visualization Monitoring and Early Warning of Surface Deformation in Subsidence Area Based on GIS. Complexity, Hindawi, 2021, 1, (2021); https://doi.org/10.1155/2021/6675241.

O. Ivanchuk, O. Tumska. Automated Construction of a Digital Model of the Micro Surface of an Object using a Stereo Pair of Digital SEM Images, Geodesy, cartography and aerial photography, 90, 50-64 (2019).