Problems of Selection of Lubricants for Ethylene High-Pressure Compressors. 4. Investigation of antifriction properties of naphtene and polyglycol oils during high loading of solid lubricant pair

Authors

  • H. O. Sirenko Vasyl Stefanyk Precarpathian National University
  • I. V. Sulyma Vasyl Stefanyk Precarpathian National University
  • V. P. Svidersky Khmelnytsky National University
  • O. V. Kuzyshyn Vasyl Stefanyk Precarpathian National University
  • N. V. Shmaltser Vasyl Stefanyk Precarpathian National University

DOI:

https://doi.org/10.15330/pcss.19.1.79-94

Keywords:

lubricant, ethylene compressors, four-ball friction machine, properties, bronze, graphelon-20, mineral, naphtene, polyglycol and polybutene oils

Abstract

The antifriction properties of naphtene and polyglycol oils during little loading with lubrication of pair bronze-tungsten-carbide-alloy WK-6 (WK-ll) and graphelon-20-WK-6 (WK-11) and high loading with lubrication of pair ball-bearing-high-chromium steel ShKh-15 - steel ShKh-15 are investigated. New correlations of viscous-and-thermal and antifriction properties of different polyglycol oils permit to creating effective composition on its base. The dependence of seizure loading during testing on FBFM on the molecular mass of different polyglycols, wear spot on the axial loading and boundary loading on concentration of additives in naphtene and mineral oils are found. The mean-square relative deviation of diameter of spot of wear from the spot by Hertz give generalization assessment of antiwear properties of lubrication oils.

References

[1] A. M. Zavoyko, I. I. Novikov, H. A Sirenko and etc., Chemical and petroleum engineering, (1), 19 (1984) (in Russian).

[2] A. M. Zavoyko, I. I. Novikov, H. A. Sirenko, A. H. Platonov, On the selection of oils for the production of high-density polyethylene (NiiTechim, Moskva, 1987) (in Russian).

[3] H. A. Sirenko, R. V. Hrinevych, I. I. Novikov, Thes. of the Rep. of the all-union Scient. and Techn. Confer. "Tribonica and antifriction material science" (NPY, Novochekassk, 1980), p. 156. (in Russian).

[4] H. O. Sirenko, Science Zb. "Bulletin of the All-Ukrainian scient. and prof. Assoc. of M. Mikhnovsky, (9),1 (1998) (in Ukrainian).

[5] O. Havryshkiv, O. Zavoyko, Herald of Vasyl Stefanyk Precarpathian National University. Series Chemistry, (III), 142 (2003) (in Ukrainian).

[6] O. Havryshkiv, Thes. of the fourth regionally conference of young scientists and students for the actually questions of chemistry (Dnipropetrovsk, 27-31 may 2002), p.118 (in Ukrainian).

[7] O. Havryshkiv, Thes. of the generalized scientific conference of Vasyl Stefanyk Precarpathian National University for 2002 year (V. Stefanyk Precarp. Nat. University. Ivano-Frankivsk, 2003 ), p. 27 (in Ukrainian).

[8] O. V. Kuzyshyn, Thes. of the first internat. Scient. and Techn. Confer. of students and postgraduated students (Dnipropetrovsk, 26-28 may 2003), p.116 (in Ukrainian).

[9] I. I. Novikov, V. P. Zakharenko, B. S. Lando. Non-lubricated piston seals in compressors (Mechanical Engineering, Lviv, 1981) (in Russian).

[10] A. A. Tarzimanov, A. V. Maryashev. Proceedings of Kazan Chemical Technologist Institute (90-73). (State registration No. 76036195) (Kazan, 1976), p. 3 (in Russian).

[11] I. R. Krichevsky. Phase equilibrium in solutions at high pressures (Goskhimizdat, Moscow, 1952) (in Russian).

[12] T. P. Zhuze Compressed gases as solvents (Nauka, Moscow, 1974) (in Russian).

[13] R. A. Shaghikhmetov Investigation of the viscosity, density of oils and the effect of dissolved gas on the viscosity at pressures up to 100-200 MPa: Abstract. Cand. dis. (Kazan, 1981) (in Russian).

[14] H. A. Sirenko Machine building and metal working (20), 44, (1977) (in Russian).

[15] H. A. Sirenko, V. P. Svidersky, V. D. Gerasimov, V. Z. Nikonov, Antifriction heat-resistant polymers (Tehnika, Kyiv, 1978) (in Russian).

[16] H. A. Sirenko, Antifriction carboplastics (Tehnika, Kyiv, 1985) (in Russian).

[17] H. O. Sirenko, Creation of antifriction composite materials on the basis of promoters of thermoforming polymers and carbon fibers: Dis. doc. Tech. Sciences: 05:16:06 (In-t Probl. of Mat. Science of the NASU, 1997) (in Ukrainian).

[18] Polybutene – Polyvis // Bulletin «Cosden Petroleum Corporation». – Translation No. P-121, (VNIINEFTEKHIM, Lviv, 1964), p.3 (in Russian).

[19] L. M. Rogacheva, A. V. Nemkov Development of technology for the production of additives based on petroleum raw materials and active elements. Studying the properties of copolymers of 2000-3500 molecular weight (GOSNIYNP, Kuybyshev, 1961) (in Russian).

[20] H. A. Sirenko, I. I. Novikov, V. P. Zakharenko, A. M. Zavoyko and etc., Grease for high-pressure ethylene compressors: Pat. 1063105 USSR, S 10 M1/28 / - No 3263977; Declaring. 23.03.81, (47), (1983). (in Russian).

[21] R. M. Matviyevsky Temperature method for estimating the limitability of machine oils (AN SSSR,Moscow, 1956) (in Russian).

[22] G. V. Vinogradov, J. Y. Podolsky, M. D. Bezborodko Use of machines with point contact of friction bodies for evaluation of wear of metals, antiwear and antifriction properties of lubricants // Methods of wear test. – (Moscow: Academy of Sciences of the USSR, 1962), p.3 (in Russian).

[23] G. A. Sirenko, A. C. Smirnov. Questions of the theory of friction, wear and lubrication (Novocherk. Polytechnic Institute, Novocherkassk, 1969) (215) (38) (in Russian).

[24] H. O. Sirenko, О. V. Kuzyshyn, F. V. Zavoiko. Problems of selection of lubricants for ethylene highpressure compressors. 1.Statement of a question of selection of lubricants. Problem of Tribology 4, 149 (2003).

[25] R. V. Grinevich, V. V. Tsasyuk, A. S. Smirnov. Application of synthetic materials (Kartya Moldovennyaske, Chisinau: 1975), p. 33 (in Russian).

[26] H. O. Sirenko, I. V. Sulyma, N. V. Shmaltser. Problems of Selection of Lubricants for Ethylene HighPressure Compressors. 3. Investigation of Viscous – and – Thermal Properties of Lubricants. Physics and Chemistry of Solid State, 18(3) (2017), p. 365.

[27] H. O. Sirenko, M. I. Martynyuk, V. P. Svidersky, I. V. Sulyma and ect. Problems of Selection of Lubricants for Ethylene High-Pressure Compressors. 5. Compatibility of oils with Polyethylene. Physics and Chemistry of Solid State, 18(4) (2017), p. 460.

Downloads

Published

2018-03-15

How to Cite

Sirenko, H. O., Sulyma, I. V., Svidersky, V. P., Kuzyshyn, O. V., & Shmaltser, N. V. (2018). Problems of Selection of Lubricants for Ethylene High-Pressure Compressors. 4. Investigation of antifriction properties of naphtene and polyglycol oils during high loading of solid lubricant pair. Physics and Chemistry of Solid State, 19(1), 79–94. https://doi.org/10.15330/pcss.19.1.79-94

Issue

Section

Review