Features of phase and structure formation in obtaining high-entropy alloy of Fe-Ti-Cr-Mn-Si-C system from a powder mixture of ferroalloys

Array

Authors

  • G.A. Bagliuk Frantsevich Institute for Problems in Materials Science NAS of Ukraine, Kyiv, Ukraine
  • M.V. Marych Frantsevich Institute for Problems in Materials Science NAS of Ukraine, Kyiv, Ukraine
  • Yu.O. Shishkina Frantsevich Institute for Problems in Materials Science NAS of Ukraine, Kyiv, Ukraine
  • A.A. Mamonova Frantsevich Institute for Problems in Materials Science NAS of Ukraine, Kyiv, Ukraine
  • O.M. Gripachevsky Frantsevich Institute for Problems in Materials Science NAS of Ukraine, Kyiv, Ukraine
  • S.F. Kyryliuk Frantsevich Institute for Problems in Materials Science NAS of Ukraine, Kyiv, Ukraine

DOI:

https://doi.org/10.15330/pcss.23.3.620-625

Keywords:

high-entropy alloy, powder metallurgy, hot forging, ferroalloy, microstructure, crystal lattice, phase, carbide

Abstract

The peculiarities of the structure and phase composition of the high-entropy alloy of the TiCrFeMnSiC system obtained from the powder mixture of ferrotitanium, ferrochrome and ferrosilicon-manganese ferroalloys are considered in the work. The technological scheme of alloy production included joint grinding of the mixture in a planetary mill, consolidation of the blanks, their heating to 1100 0C, hot forging on the arc press and subsequent annealing of hot-forged samples at 1200 0C. According to the results of X-ray analysis of the obtained alloy, it was found that the main phase of the alloy is the BCC phase with the parameter of the cubic lattice a = 0.2868 nm, which is a solid solution based on alloying components of the original charge. The phase composition of the composite also recorded titanium carbide TiC with FCC lattice with the parameter a = 0.4319 nm, which corresponds to a stoichiometric composition of about TiC0.6 and a small amount of FCC phase of iron-chromium carbide (Cr, Fe)23C6 with lattice parameter a = 1.0645 nm. The material has a high hardness (up to 60-61 HRC), which can provide high resistance of this multicomponent alloy.

References

S. Ranganathan, Alloyed pleasures: Multimetallic cocktails, Current Science, 85(10), 1404 (2003); https://asset-pdf.scinapse.io/prod/41078916/41078916.pdf.

J.W. Yeh, High–Entropy Alloys – A New Era of Exploitation, Materials Science Forum, 560, 1 (2007); https://doi.org/10.4028/www.scientific.net/MSF.560.1.

J.W. Yeh. Recent progress in high entropy alloys. European Journal of Controll, 31(6), 633 (2006); https://doi.org/10.3166/acsm.31.633-648.

S.A. Firstov, V.F. Gorban, N.A. Krapivka, E.P. Pechkovsky, New class of materials – high-entropy alloys and coatings, Bulletin of Tambov State University, 18(4), 1938 (2013); https://elibrary.ru/item.asp?id=20213631

L.A. Dreval, P.G. Agraval, M.A. Turchanin, High-entropy alloys as materials having in

basic set of basic elements, News of Donbass State Machine-Building Academy 1(32), 58 (2014); http://www.dgma.donetsk.ua/science_public/ddma/Herald_1(32)_2014/article/12.pdf.

M.I. Gasik, N.P.Lyakishev. Theory and technology of electrometallurgy of ferroalloys (SP Internet Engineering, Moscow, 1999).

O.I. Polyakov, M.I. Gasyk. Electrometallurgy of ferroalloys, special steels and alloys (Zhurfond, Dnipropetrovsk, 2009).

Y.H. Fan, Y.P, Zhang, H.G. Guan, H.M. Suo, L. He, AlNiCrFexMo0.2CoCu High Entropy Alloys Prepared by Powder Metallurgy, Rare Metal Materials and Engineering 42(6), 1127 (2013); https://doi.org/10.1016/S1875-5372(13)60074-0.

X.W. Qiu, Microstructure and properties of AlCrFeNiCoCu high entropy alloy prepared by powder metallurgy, Journal of Alloys and Compounds 555, 246 (2013); https://doi.org/10.1016/j.jallcom.2012.12.071.

G.A. Baglyuk, M.V. Marich, A.A. Mamonova, Structure formation during the synthesis of high-entropy alloys of the Al – Cr – Fe – Ni – Cu, Al – Ti – Cr – Fe – Ni – Cu systems by powder metallurgy methods, Metals Science and Metal Processing, 4, 30 (2015); http://nbuv.gov.ua/UJRN/MOM_2015_4_8.

M.V. Marych, G.A. Bagliuk, A.A. Mamonova, G.M. Molchanovska, Y.J. Yevich, Features of structure, phase composition and properties of hot-forged high-entropy alloys of Ti-Cr-Fe-Ni-C system, Materials science. Nonequilibrium phase transformations, 5(4), 123 (2019); https://stumejournals.com/journals/ms/2019/4/123.

S. Guo, S.T. Liu, Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase, Progres in material science: Materials international 21, 433 (2011); https://doi.org/10.1016/S1002-0071(12)60080-X.

G. Bagliuk, G. Maksimova, A. Mamonova, D. Goncharuk, The Structure and Phase Composition Acquired by Fe–Ti–Ni–C Alloys in Thermal Synthesis, Powder Metallurgy and Metal Ceramics 59, 171 (2020); https://doi.org/10.1007/s11106-020-00149-2.

Published

2022-09-30

How to Cite

Bagliuk, G., Marych, M., Shishkina, Y., Mamonova, A., Gripachevsky, O., & Kyryliuk, S. (2022). Features of phase and structure formation in obtaining high-entropy alloy of Fe-Ti-Cr-Mn-Si-C system from a powder mixture of ferroalloys: Array. Physics and Chemistry of Solid State, 23(3), 620–625. https://doi.org/10.15330/pcss.23.3.620-625

Issue

Section

Scientific articles (Physics)