Features of Technology for Obtaining Polymer Composite Materials Based on Polytetrafluoroethylene (Review)

K.V. Berladir; P.V. Rudenko; К.O. Dyadyura; V.A. Sviderskiy; О.A. Budnik

doi:10.15330/pcss.17.4.582-593

Authors

K.V. Berladir Sumy State University
P.V. Rudenko Sumy State University
К.O. Dyadyura Sumy State University
V.A. Sviderskiy National Technical University of Ukraine «Kyiv Polytechnic Institute»
О.A. Budnik Belgorod State Technological University of V. Shukhov

DOI:

https://doi.org/10.15330/pcss.17.4.582-593

Keywords:

polytetrafluoroethylene, polymer composite, technology, mechanical activation, mixing, pressing, sintering, structure, properties

Abstract

The experience of many theoretical and practical works concerning the technology of PTFE-composites formation has been analyzed and systematized. The peculiarity of the work consists in the fact that PTFE-composites reinforced by carbon fibers are considered to be complex objects with properties characteristic to tribotechnical material science of composite materials. The structure complexity of such objects provides their consumer properties due to many factors, which influence the significant increase of physicomechanical characteristics. The research results defined operation regimes of process equipment: after the processing PTFE-composites have increased operation properties in comparison with basic and can be most effectively used for industrial implementation.

References

[1] Handbook of engineering polymeric materials / edited by Nicholas P. Cheremisinoff (Marcel Dekker Inc., New York, 1997).
[2] Handbook of fluoropolymer science and technology / edited by D. W. Smith, S. T. Iacono, S.S. Iyer (John Wiley & Sons, Inc., Hoboken, 2014).
[3] J. G. Drobny, Technology of fluoropolymers (CRC Press, New York, 2009).
[4] S. Thomas, J. Kuruvilla, S. K. Malhotra, Ko. Goda, M. S. Sreekala, Polymer Composites. Volume 1: Macro - and Microcomposites (Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, 2012).
[5] I. V. Kragel'skij, M. N. Dobychin, V. S. Kambalov, Osnovy raschetov na trenie i iznos (Mashinostroenie, Moskva, 1977).
[6] Ju.P. Adler, E.V. Markova, Ju.V. Granovskij, Planirovanie jeksperimenta pri poiske optimal'nyh uslovij (Nauka, Moskva, 1976).
[7] Ju. K. Mashkov, Z. N. Ovchar, V. I. Surikov, L. F. Kalistratova, Kompozicionnye materialy na osnove politetraftorjetilena. Strukturnaja modifikacija (Mashinostroenie, Moskva, 2005).
[8] G. A. Sirenko, Antifrikcionnye karboplastiki (Tehnika, Kiev, 1985).
[9] A. K. Pugachev, O. A. Rosljakov, Pererabotka ftoroplastov v izdelija (Himija, Leningrad, 1987).
[10] A. A. Skaskevich, V. A. Struk, O. V. Holodilov, Materialy, tehnologii, instrumenty 5(2), 47 (2000).
[11] Tribohimicheskie tehnologii funkcional'nyh kompozicionnyh materialov / pod red. V. A. Struka, F.G. Lovshenko (GGAU, Grodno, 2007).
[12] Dzh. Mjenson, L. Sperling, Polimernye smesi i kompozity / pod red. Ju. K. Godovskogo (Himija, Moskva, 1979).
[13] Ju. S. Lipatov, Fizicheskaja himija polimerov (Himija, Moskva, 1977).
[14] O. A. Budnik, V. A. Sviderskij, K. V. Berladir, A. F. Budnik, P. V. Rudenko, Nauchno-teoreticheskij zhurnal «Vestnik BGTU im. V.G. Shuhova» 5, 10 (2014).
[15] V. M. Buznik, V. M. Fomin, A. P. Alhimov, Metallpolimernye nanokompozity (poluchenie, svojstva, primenenie) (Izd-vo SO RAN, Novosibirsk, 2005).
[16] A. A. Ohlopkova, A. V. Vinogradov, L. S. Pinchuk, Plastiki, napolnennye ul'tradispersnymi neorganicheskimi soedinenijami (IMMS NANB, Gomel', 1999).
[17] O. A. Budnik, V. A. Sviderskii, A. F. Budnik, K. V. Berladir, P. V. Rudenko, Chem. Petrol. Eng. 52(1), 63 (2016).
[18] Tehnicheskie uslovija TU 301-05-16-89. Zagotovki iz ftoroplastovoj kompozicii. - Perm', 1989.
[19] Ju. A. Panshin, S. G. Malkevich, C. S. Dunaevskaja, Ftoroplasty (Himija, Leningrad, 1978).
[20] O. A. Budnik, A. F. Budnik, P. V. Rudenko, V. A. Sviderskiy, K. V. Berladir, Funct. Mater. 22(4), 499 (2015).
[21] V. A. Shelestova, O. R. Yurkevich, P. N. Grakovich, Polym. Sci. Ser. B, 44(3-4), 94 (2002).
[22] A. F. Budnik, H. V. Berladіr, P. V. Rudenko, V. A. Svіders'kij, Patent 101976 U Ukraїna, MPK C08J5/04, opubl. 12.10.2015, Bjul. № 19 (2015).
[23] L. R. Vishnjakov, A. V. Maznaja, T. V. Tamila, L. N. Pereselenceva, Poroshkovaja metallurgija 7/8, 3 (2008).
[24] A. I. Burja, N. T. Arlamova, S. P. Suchilina-Sokolenko, Kompozicіjnі polіmernі materіali 24(1), 24 (2002).
[25] D. O. Chervakov, P. І. Bashtanik, M. V, Burmіstr, Voprosy himii i himicheskoj tehnologii 3,100 (2009).
[26] O. A. Novikova, V. P. Sergeev, V. F. Litvinov, Plasticheskie Massy 11, 37 (1980).
[27] O. A. Budnik, M. V. Burmistr, Issues of Chemistry and Chemical Technology, 4, 80 (2009).
[28] V. A. Shelestova, P.N. Grakovich, S.G. Danchenko, V.A. Smirnov, Chem. Petrol. Eng. 42(11), 663 (2006).
[29] G. A. Sirenko, A. F. Budnik, A. s. 1736171 (SSSR), MKI S08j5/16; S08L27/18/ (Ukraina), opubl. 22.01.92 (1992).
[30] A. F. Budnik, O. A. Budnik, P. V. Rudenko, M. V. Burmіstr, A. A. Іl'їnih, V. B. Juskaєv, O. A. Tomas, Patent 40960 Ukraїna, MPK S08L27/00, opubl. 27.04.2009, Bjul. № 8 (2009).
[31] V. U. Novikov, L. P. Kobec, I. S. Deev, Plasticheskie massy 2, 15 (2004).
[32] O. A. Budnik, A. F. Budnik, M. V. Burmіstr, P. V. Rudenko, A.A. Іl'їnih, Patent 40282 Ukraїna, MPK S08J5/16, opubl. 25.03.2009, Bjul. № 6 (2009).
[33] O. A. Budnik, M. V. Burmіstr, Vostochno-evropejskij zhurnal peredovyh tehnologij 4/10(40), 4 (2009).
[34] A. F. Budnik, P. V. Rudenko, O. A. Budnik, M. V. Burmіstr, A. A. Іl'їnih, V. B. Juskaєv, A. O. Tomas, Patent №41868 U Ukraїna, MPK S08L27/18, opubl. 10.06.2009, Bjul. № 11 (2009).
[35] A. F. Budnik, A. A. Tomas, P. V. Rudenko, O. A. Budnik, A. A. Іl'їnih, Vostochno-evropejskij zhurnal peredovyh tehnologij 4/6(34), 24 (2008).
[36] A. F. Budnik, A. A. Іl'їnih, P. V. Rudenko, O. A. Budnik, M. V. Burmіstr, V. B. Juskaєv, A. O. Tomas, Patent №42870 U Ukraїna, MPK S08L27/18, opubl. 27.07.2009, Bjul. № 14 (2009).
[37] A. A. Tomas, A. F. Budnik, Kompressornaja tehnika i pnevmatika 4, 10 (2013).